6 Stage Reverse Osmosis Pumped Mineral Water Purification System
This Pure-Pro Mineral 6 stage pumped reverse osmosis system is designed for where the feed water pressure is low (under 45psi) or where the source water contains higher than normal amounts of dissolved soilds. This unit uses electricity for the pump and provides pure water at your sink for drinking or cooking.
The unit improves both the taste and quality of your water. It reduces up to +99% of the chlorine, as well as objectionable odors and sediment. The reverse osmosis unit also reduces the following hard water contaminants that may be present in your water: lead, copper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium...
Using a Pure-Pro water filter system you receive unrivalled quality in water filtration.
- 1st Stage: 5 micron Polypropylene filter (life Span 6 months Approx) Removes all particles above 5 micron from the water supply this includes metals, rust, dirt, sand and general water sediment
- 2nd Stage: Carbon Filter (life Span 6 months Approx) Removes, 99% of the chlorine, Herbicides, Pesticides, Trihalomethanes, Organic Chemicals, Lead and Aluminum. It also enhances the taste, odor, and colour of the water
- 3rd Stage:1 Micron Polypropylene Filter (life Span 6 months Approx)Removes all particles above 1 micron from the water supply this includes any remaining water sediment
- 4th Stage: RO Membrane 80 gpd (life Span 2-4 years Approx)A thin film composite (TFC) high quality membrane that processes 80 gallons per day. It removes the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium. The water is forced through this membrane and any un-pure water is discarded allowing through just pure filtered water to enter the pressurized holding tank
- 5th Stage: In Line Activated Post Carbon Filter (life Span 1 year Approx) Once the faucet is opened the water goes through a final post carbon water filter that effectively polishes the water prior to your consumption
- 6th Stage: Inline Mineral Filter and accessories is included with this RO unit adding this extra item involves just connecting it inline after the post carbon filter and this section includes filter, glands and clips with this 5 stage unit to make it a 6 stage Reverse Osmosis Water Filter (Filter Life 1 Year Approx)
The PurePro® Mineral filter gives back minerals such as calcium, magnesium, sodium, potassium, which were taken away while purifying the water.
This system hides away under your sink and provides pure water at your fingertips. The system comes complete with a NSF 3.2 gallons water storage tank and all the necessary fittings, installation components, instructions and a long-reach attractive faucet.
Features:
- 3.2 Gallon NSF Standard water storage tank
- FDA Approved polypropylene made flat cap housing ( double O'Ring )
- Flow Restrictor, Stainless Steel Check Valve.
- European design attractive faucet
- Feed water connector.
- Drain Saddle Valve.
- Mineral Filter
- Four Color Coded 1/4 inch Tubing for System Connection
- Completely Assembled
- 100% Factory Tested and Sterilized Ready for Installation
- Installation Instruction
Specifications:
- Membrane: 80 GPD / 302 LPD
- With a transformer, available in 220Volt (50/60Hz)
- Operation pressure: 5 -80 psi
- Dimensions:(cm) 37 (L) x 45(H) x 20 (W) – system (cm) 28 (L) x 28(W) x 35 (H)- tank W
- Weight:13 kg - system ….4 kg - tank
Notes:
- Pure-Pro manufacture and supply several styles of reverse osmosis units the most common are called the "EC" and "RO" range. The main difference between them is the "RO" range is supplied with a better faucet and large mounting frame than the less expensive "EC" range. This reverse osmosis unit is an RO101SV Space Saving Pump with Alkaline Filter
